Bennett Machine & Stamping Company produced these carbon steel cans for a bearing manufacturer in Ohio. The inner and outer cans were used to cast bronze bearing blanks. We used hydraulic cushion presses to produce the deep drawn carbon steel stampings. Stamping dies for this job were designed and built in house. Two successive deep draw stamping operations including piercing and trimming were performed on 0.090″ thick carbon steel sheets. After stamping, the can had a deep draw depth of 6-1/2″. Finally, we packaged the custom sheet metal stampings in returnable containers and shipped them to the specified location.


Capabilities Applied/Processes

Deep drawn stamping using hydraulic press with cushions; 2 draw processes including pierce and trim; run off coil

Material Thickness

0.090 Thick

Product Width

10″ Including Flange

Product Height

6-1/2″ Deep

Base Material

Carbon Steel


Returnable Containers at 700 Pcs/Crate

Industry for Use

Bearing Manufacturer



Delivery Time

4 – 6 Weeks

Delivery Location


Standards Met

ISO 9001:2015
To customer supplied print

Product Name

Outer can and inner can

Design Work

Design and build tooling, manufacture and ship parts

Drawing Type Accepted


Product Description

Major Bearing manufacturer required an inner and outer can with which to cast bronze bearing blanks. The deep drawn tooling for both components were designed and built in-house based on client specifications.